Suggested Specifications

Mirror system shall be constructed of matte black powder coated 14-gauge steel. The mirror supports are a truss frame design utilizing 1" x 2" rectangular tubing for maximum rigidity. The entire system is self aligning during assembly to ensure proper alignment of the projector to the mirror or mirrors. The top mount projector base (shown) provides positive tilt adjustment to 45 and has a perforated steel top plate for secure projector placement while allowing for air circulation. The inverted projector mount cradle provides positive and locking tilt adjustment from 0 to 90 and is equipped with proper mounting hardware to insure proper projector alignment. Projection grade mirrors have tilt adjustment with positive locking from 0 to 45 Although designed to your exact specifications and requirements, the complete system is "micro-adjustable" for any fine tuning adjustments required in the field.


Glass Front Surface Mirror Specifications

This Da-Lite projection grade mirror is a first surface mirror on glass. The mirror is coated with a thin layer of quartz to increase durability of the aluminum finish. This mirror provides greater durability and is less sensitive to climate.

Reflectance	94% for mirrors up to 60" x 80" (90% for larger sizes).
Adhesion	No mirror surface will be lifted by the "cellophane tape adhesion test."
Temperature Stability	-30°C to 260°C
Flatness	Maximum 2 fringes per inch
Size	Up to 98" x 98". Other custom sizes available upon request.
Size Tolerance	+/- 1/4" up to 60" x 80"
Cleaning	A cleaning kit is available from Da-Lite